Waterproof Tough and Light fiber optical cable For Cable Distribute
Waterproof fan out fiber optic cable can be used for outdoor and to
assemble fiber optic connectors.
4 Core Waterproof Pigtail is a length of fiber with one-end connector
attached, suitable for out door
use and adverse environmental condition,SC/APC or SC/UPC..LC,FC Connector is optional.
Length 3M,4M,5M...is optional.
Waterproof cable can assemble fiber optic connectors with FC/SC/ST
PC or APC, SM and MM. Waterproof cable is one or more single core
cables stranded around the metallic central strength member and
jacketed with PE sheath.
These cables are constructed bundling tight buffered simplex
optical fiber (900μm tight buffer fiber,
aramid yarn as strength member) in an outer jacket. Non metallic
FRP strength members in the cable
give it good tensile strength. An Aluminium tape and PE outer
sheath give this cable excellent mechanical,
ultraviolet, environmental protection, water and moisture
Low attenuation and dispersion
Steel wires enhance tensile strength, tension-resistance and crush
Good performance in crush resistance and tensile resistance
Small outer diameter, light weight, compact construction and
Excellent water-resistance performance
Applicable to FC , SC , ST , MU...connectors
Waterproof ,rigid and anti-corrosive copper connector
Complied With Or Exceeds Standard
ITU-T G652.D . ITU-T G651.1 OM1 OM2 OM3 OM4
ITU-T G657.A . IEC60793-2-10 type A1a.1/A1b OM1/OM2
IEC60793-2-10 type A1a.2 OM3 . IEC60793-2-10 type A1a.3 OM4
ISO/IEC 11801 , ISO/IEC 24702 . IEEE 802.3z Gigabit Ethernet
ANSI/TIA/EIA 568C.3 . ROHS Compliant Directive 2011/65/EU(ROHS2.0)
Of all the differences between multimode & singlemode fiber,
the most fundamental differences are the
size of the fiber's core and the associated attenuation or loss and
bandwidth of the fiber. The smaller the
core diameter, the higher the fiber's bandwidth and the lower the
attenuation (loss in dB per kilometer).
The fiber's attenuation and bandwidth are also dependent on
Singlemode was for high-speed longdistance transmission and
multimode (in either the 50 µm or 62.5 µm
core diameters) was used for lower speed short distance
applications. Multimode 50 µm fiber had a lower
cost and higher modal bandwidth than multimode 62.5 µm core fiber.
Bandwidth is a measurement of the
data carrying capacity of the fiber. A higher bandwidth fiber
carries more data. See table below.
|Fiber Type||Max. Attenuation (dB/km)||Min.Overfill Launch|
Link Distance (m)
Min. bending radius(mm)
20*Dia of cable
10*Dia of cable
Fiber Optic Cable, Optical Fiber Cable, Tight buffered cable, Fiber