SC APC Connector optical Wavelength Division Multiplexer Low
Wavelength Division Multiplexer (WDM) is the device which uses
multiple optical maser to transmit multi beam of different
wavelengths of laser technology through a single fiber. Each signal
is transmitted in its unique channel after the data (text, voice,
video and so on) modulated. WDM can increase the existing fiber
infrastructure for phone companies and other operators.
DWDM (dense wavelength division multiplexing) system can support
more than 150 different wavelengths of light beam transmitted
simultaneously, and each beam peaked at 10Gb/s data rates. This
system provides data transmission over 1Tb/s rate but the cable is
smaller than a human hair.
Wavelength division multiplexing technology as a system concept,
there are 3 modes, wavelength division multiplexing at 1310 nm and
1550 nm wavelength, CWDM (Coarse Wavelength Division Multiplexing)
and DWDM (Dense Wavelength Division Multiplexing).
Low insertion loss
Wide pass band
High channel isolation
High stability and reliability
Epoxy free on optical path
Fiber optical amplifier
Center wavelength Accuracy(nm)
Channel Passband (@-0.5dB bandwidth) (nm)
Insertion loss variation(dB)
Insertion loss temperature sensitivity(dB/℃)
Polarization dependent loss(dB)
Polarization mode dispersion(ps)
Maximum power handling(mW)
￠5.5*L34(L38 for 900um loose tube)
Note: All the data above does not include connectors.
2=900um Loose tube